Network adapter - OCP 3.0 - 10Gb Ethernet/25Gb Ethernet x 2
| Main Specifications | |
|---|---|
| Product Description | Broadcom NetXtreme E-Series N225P - network adapter - OCP 3.0 - 10Gb Ethernet/25Gb Ethernet x 2 |
| Device Type | Network adapter |
| Form Factor | Plug-in card |
| Interface (Bus) Type | Open Compute Project mezzanine (OCP) 3.0 |
| Ports | 10Gb Ethernet/25Gb Ethernet x 2 |
| Weight | 3.21 oz |
| Data Link Protocol | 10GbE, 25GbE |
| Processor | Broadcom BCM57414 |
| Compliant Standards | IEEE 802.3ap, IEEE 802.3az |
| General | |
| Device Type | Network adapter |
| Form Factor | Plug-in card |
| Interface (Bus) Type | Open Compute Project mezzanine (OCP) 3.0 |
| Expansion / Connectivity | |
| Interfaces | 2 x 10Gb Ethernet/25Gb Ethernet - SFP28 |
| Miscellaneous | |
| Compliant Standards | EMC |
| Networking | |
| Ports | 10Gb Ethernet/25Gb Ethernet x 2 |
| Connectivity Technology | Wired |
| Data Link Protocol | 10 Gigabit Ethernet, 25 Gigabit Ethernet |
| Features | WOL, IPv6 support, DCBX support, IPv4 support, PXE support, LSO, LRO, RSS, UEFI support, SR-IOV, DCB, TSO, MSI-X, GRE, iSCSI boot, PFC, NC-SI, VXLAN, NVGRE, FLR, MSI, Jumbo Frames support (up to 9000 bytes), MCTP over SMBus, TruFlow, Interrupt coalescing, VMMQ, ETS, QCN, GENEVE support, Low Latency RDMA over RoCE, OCP 3.0 support, vSwitch Acceleration, tunnel-aware stateless offloads, SMBus 2.0, NetQueue |
| Compliant Standards | IEEE 802.3ap, IEEE 802.3az |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 131 °F |
| Processor / Memory | |
| Processor | Broadcom BCM57414 |
| Dimensions & Weight | |
| Weight | 3.21 oz |