Switch - L3+ - managed - rack-mountable
| Main Specifications | |
|---|---|
| Product Description | D-Link xStack DGS-6604 Starter Kit - switch - managed - rack-mountable |
| Device Type | Switch - L3+ - managed |
| Enclosure Type | Rack-mountable |
| Jumbo Frame Support | Yes |
| Routing Protocol | BGP-4, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, DVMRPv3, RIPng, BGP-4+ |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, TFTP, SSH-2, CLI |
| Features | Flow control, hot swap module replacement, routing, DHCP support, VLAN support, IGMP snooping, DoS attack prevention, port mirroring, WRR queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, D-Link Green Technology |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s |
| Power Redundancy | Optional |
| General | |
| Device Type | Switch - L3+ - managed |
| Enclosure Type | Rack-mountable |
| Jumbo Frame Support | Yes |
| Routing Protocol | BGP-4, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPFv3, DVMRPv3, RIPng, BGP-4+ |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, TFTP, SSH-2, CLI |
| Authentication Method | Secure Shell (SSH), RADIUS |
| Features | Flow control, hot swap module replacement, routing, DHCP support, VLAN support, IGMP snooping, DoS attack prevention, port mirroring, WRR queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, D-Link Green Technology |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s |
| Expansion / Connectivity | |
| Interfaces | 1 x management RJ-45 ¦ Management: 1 x 9 pin D-Sub (DB-9) |
| Expansion Slots | 4 (total) / 3 (free) x expansion slot |
| Installed Modules Qty (Max) | 1 (installed) / 4 (max) |
| Power | |
| Power Device | Internal power supply |
| Installed Qty | 1 |
| Max Supported Qty | 4 |
| Power Redundancy | Optional |